Neuron PT100 HT 25 cm Probe

General Description

Neuron PT100 HT 25cm Probe reads the temperature and convert it into a digital measurement.

The sensor comes with a 250×3 mm probe PT100 element and 200 cm Fibre glass insulated wire. Due to wireless transmission of the signal, it is also easy and timesaving to install.

Due to wireless transmission of the signal, it is also easy and timesaving to install. The device is housed in an IP67 rated enclosure that provides protection against dust and water ingress, making it suitable for use in harsh industrial environments. It’s small size and light weight
makes it a very powerful device, ideal for use in predictive maintenance and monitoring.

Principle of Operation

The Neuron PT100 measures every third second and transmits every second minute with standard config. The sensor also comes in a version where the sensor measures every ten seconds and transmits the average of the twelve last measurements every ten minute.

Should the trigger for critical data transmission be reached between two transmissions, the sensor transmits immediately after measurement.

Features

Integrated long life battery – up to 10 years lifetime

Continuous measurement and instant alarm

Adjustment of parameters such as measurement frequency on request

Define your own alarm levels in the Neuron app

Receive alerts as push notifications, emails or SMS

Easily connect the sensor to the system with the QR-code on the sensor. Ensures immediate and accurate registration in the app on your phone/PC/tablet

The sensor transmits data to your nearby Neuron Gateway which then again communicates with the Neuron Cloud

Essentials

PT100 Measuring Range:
-100°C to +650°C

Measuring Frequency:
Every 3 sec

Report Frequency:
Reports every 2 min. Or immediately if trigger for critical data transmission is reached

Expected Operating Time*:
Up to 10 years

*Depends on measurement frequency, amount of critical data transmissions and ambient temperature

Neuron system benefits

Robust sensors
Suitable for rough environments
Wireless
Wireless sensor with integrated battery
Long lifetime
Typical 10 years battery life
Quick installation
Wireless, installed and operational in minutes
Collect and deliver data
Data delivery through API and app
Broad offering
More than 50 different sensor types available

Operational specification

PT100 Measuring range:
-100°C to +650°C

Resolution:
0.1°C

Accuracy:
0.5°C + 0.005 x t

Measuring Frequency*:
Every 10 sec

Report Frequency*:
Reports every 2 min. Or immediately if trigger for critical data transmission is reached, see below

Reported Value:
Reports last reading

Trigger for Critical Data Transmission*:
10°C change in measurement

Electronics Operating Environment:
Ambient temperature: -40 – 85 °C
Relative humidity: 0-100%
Altitude: < 2000m above sea level
Pollution degree: 4

IP Grade:
IP 67, wet conditions, indoor use

Radio Frequency:
863-870 MHz / 902-928 MHz

Battery Type:
Li-SOCl2, 3.6V

Expected Operating Time**:
Up to 10 years

* Adjustable on request
** Depends on measurement frequency, amount of critical data transmissions and ambient temperature

Physical specification

Materials:
POLYblend 65 FS / TPU
PT100 probe: 316 Stainless Steel

Connection Type:
IEC Miniature Connector RTD 200 cm Fibre glass insulated wire.

Process Connection:
250×3 mm Probe

Dimensions LxWxH:
Sensor: 37x23x14mm
Probe: 250×3 mm (Other dimensions on
request)

Regulatory

Certifications:
CE marking
UK CA
FCC
Industry Canada

Directives/Standard:
IEC 61010-1:2010
FCC Part 15C
RED 2014/53/EU Radio
Equipment Regulations 2017

Installation

Place elevated with distance to fixed objects

Keep antenna clear off the metallic surface

Neuron sensors are ready for use out of the box and will start logging data after registering the sensor in the app. Even though Neuron sensors deliver great range and long battery life, following some simple guidelines for mounting of the sensor and gateway can greatly improve signal coverage and lifetime of the sensor.

To ensure optimal antenna performance and signal strength, the sensor should be placed elevated with some distance to fixed objects. Keep in mind that RF-signals are greatly affected by close metallic surfaces.

For sensors with an external antenna, the antenna should be clear off the metallic surface.

For sensors operating in environments with greatly varying temperatures, care should be taken to avoid putting the sensor in unnecessary stress. Very high or low temperatures will affect the battery life and the signal strength of the sensor. While some sensors must be close to the source of heat or cold, other sensors have external probes which allow the sensor to be placed at a distance.

Fastening
The small, compact blue Neuron sensors are fitted with fastening holes for use with cable ties. The sensors are also delivered with double-sided tape that may be used for fastening of the sensors.

All the black Neuron sensors, like the Neuron IR380 and Neuron Vibration, are fitted with a strong magnet at the back for easy fastening. If there is no magnetic surface, then double-sided tape is a good solution.