PRODUCT

Neuron PT100 HT Magnet /
PT100 HT Average Magnet

The Neuron PT100 HT Magnet sensor comes ready to use out of the box and are fitted with a magnet to enable easy installation on objects made of ferrous materials. This makes the sensor perfect for retrofit installation.

Experience how easy it is to get started and the huge benefits of our simple and practical IoT solutions.

General Description

Neuron PT100HT Magnet read the temperature and convert it into a digital measurement.

The sensor comes with a magnet with 6kg pull force and will hold 90% of its pull at 400 °C.

Spring loaded measuring tip ensures good thermal connection to surface.

Due to wireless transmission of the signal, it is easy and timesaving to install.

 

Principle of Operation

The Neuron PT100 measures every third second and transmits every second minute with standard config. The sensor also comes in a version where the sensor measures every ten seconds and transmits the average of the twelve last measurements every ten minute.

Should the trigger for critical data transmission be reached between two transmissions, the sensor transmits immediately after measurement.

 

Features

  • Integrated long life battery – up to 10 years lifetime
  • Continuous measurement and instant alarm
  • Adjustment of parameters such as measurement frequency on request
  • Define your own alarm levels in the Neuron app
  • Receive alerts as push notifications, emails or SMS
  • Easily connect the sensor to the system with the QR-code on the sensor. Ensures immediate and accurate registration in the app on your phone/PC/tablet
  • The sensor transmits data to your nearby Neuron Gateway which then again communicates with the Neuron Cloud

 

Typical Applications

  • Machine Monitoring
  • Industry Processes
  • Cooling liquid in transformers
  • Temporary Cathode Collector bar temperature

    monitoring

 

Essentials

Measuring Range:
-50°C to +400°C

Measuring Frequency:
PT100 HT Magnet: Every 3 sec
PT100 HT Average Magnet: Every 10 sec

Report Frequency:
PT100 HT Magnet: Every 2 min. Or immediately after measurement if trigger for critical data transmission is reached
PT100 HT Average Magnet: Every 10 min. Or immediately after measurement if trigger for critical data transmission is reached

Expected Operating Time*:
Up to 10 years

*Depends on measurement frequency, amount of critical data transmissions
and ambient temperature

 

Ordering Information

Part numbers
PT100 HT Magnet: Europe/The Middle East/Africa: 422666
PT100 HT Magnet: North America/Australia/New Zealand: 422675
PT100 HT Average Magnet: Europe/The Middle East/Africa: 422657
PT100 HT Average Magnet: North America/Australia/New Zealand: 422665

Product Sheet

Product Sheet –
Neuron PT100 High Temperature Magnet
Neuron PT100 High Temperature Average Magnet

Made in Norway

Our sensors are developed and made in Norway.

Neuron system benefits

  • Robust sensors
    Suitable for rough environments
  • Wireless
    Wireless sensor with integrated battery
  • Long lifetime
    Typical 10 years battery life
  • Quick installation
    Wireless, installed and operational in minutes
  • Collect and deliver data
    Data delivery through API and app
  • Broad offering
    More than 50 different sensor types available

Operational specification

Measuring range:
-50°C to +400°C

Resolution:
0.1°C

Accuracy:
0.5°C + 0.005 x t

Measuring Frequency*:
PT100 HT Magnet: Every 3 sec
PT100 HT Average Magnet: Every 10 sec

Report Frequency*:
PT100 HT Magnet: Reports every 2 min. Or immediately if trigger for critical data transmission is reached, see below
PT100 HT Average Magnet: Reports every 10 min. Or immediately if trigger for critical data transmission is reached, see below

Reported value:
PT100 HT Magnet: Reports last reading
PT100 HT Average Magnet: Reports average of 12 last readings

Trigger for Critical Data Transmission*:
PT100 HT Magnet: 2°C change in measurement
PT100 HT Average Magnet: 10°C change in measurement

Electronics Operating Environment:
Ambient temperature: -40 – 85 °C
Relative humidity: 0-100%
Altitude: < 2000m above sea level
Pollution degree: 4

IP Grade:
IP 67, wet conditions, indoor use

Radio Frequency:
863-870 MHz / 902-928 MHz

Battery Type:
Li-SOCl2, 3.6V

Expected Operating Time**:
Up to 10 years

* Adjustable on request
** Depends on measurement frequency, amount of critical data transmissions and ambient temperature

Physical specification

Materials:
Sensor: POLYblend 65 FS / TPU
PT100 probe: 316 Stainless Steel / Magnet

Connection Type:
Glass fibre wire

Process Connection:
Magnet

Dimensions LxWxH:
Sensor: 37x23x14mm
Magnet: 40x25x28mm

Regulatory

Certifications:
CE marking
UK CA
FCC
Industry Canada

Directives/Standard:
IEC 61010-1:2010
FCC Part 15C
RED 2014/53/EU Radio
Equipment Regulations 2017

Installation

Neuron sensors are ready for use out of the box and will start logging data after registering the sensor in the app. Even though Neuron sensors deliver great range and long battery life, following some simple guidelines for mounting of the sensor and gateway can greatly improve signal coverage and lifetime of the sensor.

To ensure optimal antenna performance and signal strength, the sensor should be placed elevated with some distance to fixed objects. Keep in mind that RF-signals are greatly affected by close metallic surfaces.

For sensors with an external antenna, the antenna should be clear off the metallic surface.

For sensors operating in environments with greatly varying temperatures, care should be taken to avoid putting the sensor in unnecessary stress. Very high or low temperatures will affect the battery life and the signal strength of the sensor. While some sensors must be close to the source of heat or cold, other sensors have external probes which allow the sensor to be placed at a distance.

Fastening
The small, compact blue Neuron sensors are fitted with fastening holes for use with cable ties. The sensors are also delivered with double-sided tape that may be used for fastening of the sensors.

All the black Neuron sensors, like the Neuron IR380 and Neuron Vibration, are fitted with a strong magnet at the back for easy fastening. If there is no magnetic surface, then double-sided tape is a good solution.

Neuron system: Wide range of wireless IoT sensors

The neuron system has more than 50 different robust sensors that can be installed in minutes.

SUPPORT

Need help?

Please visit our Support site:

KNOWLEDGE

Further reading

HOW IT WORKS

El-Watch Neuron system - wireless IoT sensors

A central feature of our solutions is predictive maintenance. By monitoring machinery and systems, you will know how much strain they can take before breaking down. This enables you to safely increase performance and strategically plan maintenance for minimal revenue loss.

Neuron Sensors

Neuron Gateway

27_updated_Profilmanual-pdf

Neuron Cloud

Neuron App

PRODUCT BROCHURE

Find the perfect
sensor solution

We offer over 50 different sensor types. Explore the possibilities in our product brochure.