The Neuron Actuator is a DIN-mounted, easy-to-use device that controls a SPDT relay remotely using the Neuron app. The app provides real-time status updates and notifications. The relay is capable of switching loads at 250VAC/30VDC up to 10A, has an input voltage range of 24VDC and has a maximum power consumption of 5W. This device is suitable for a wide range of applications such as industrial control and monitoring, and remote-control systems.
The Neuron Actuator is a versatile and easy-to-use device that allows you to control a SPDT (Normally Open and Normally Closed) relay remotely with the Neuron app. With its long-range communication capabilities and low power consumption, the Neuron Actuator can be used in a wide range of applications, including industrial control and monitoring, and remote-control systems.
The Neuron Actuator can be easily controlled using the Neuron app which allows you to monitor and control the relay in real-time. The app supports selection of a simple on/off mode or timer activation with adjustable duration.
The board uses a relay rated for 250VAC / 30VDC up to 10A which can be used to control a wide range of devices, including lights, fans, and motors. The compact size and wireless connection of the Neuron Actuator makes it easy to integrate into existing systems.
The Neuron Actuator communicates wirelessly with a Neuron Gateway that connects the device to the Neuron Cloud. This allows the user to monitor and control the state of the relay in near real-time. The app provides an easy-to-use interface for controlling the relay and displaying its current state.
Once the Actuator is registered in the app, the user can monitor and control the Actuator. The Actuator can be in two modes: 1) A simple on/off toggle mode or 2) A timed activation mode where the user inputs the duration of the activated relay. The relay can be used to control various loads such as lights, fans or motors, depending on the specific application.
It is important to note that the specific implementation and details of the device may vary and should be confirmed with the manufacturer.
Part numbers
Europe/The Middle East/Africa: 422401
Relay Rated Current:
10A @ 25 °C (8A @ 75 °C) resistive-inductive load, PF=0.75
Relay Rated Voltage:
30VDC, 250VAC
Report Frequency:
Reports status every 15 min. Or immediately
Response Time:
Approx 5 sec
Operating voltage:
22-26 VDC, Max. 5W
Operating Environment:
Temperature: -40 – 75 °C
Relative humidity: 0-80% (non-condensing)
Altitude: < 2000m above sea level
Pollution degree: 3
Indoor use, not for wet locations
Radio Frequency:
863-870 MHz
Materials:
Polyamid
Mounting:
DIN-rail
Dimensions LxWxH:
118x25x139mm
Cleaning:
Wipe clean with a damp cloth
Certifications:
CE marking
UK CA
Directives/Standard:
IEC 61010-1:2010 & IEC 61010-2-201:2017
RED 2014/53/EU Radio
Equipment Regulations 2017
The neuron system has more than 50 different robust sensors that can be installed in minutes.
Accurate energy monitoring is the foundation of efficient energy use. Read
Failure Modes and Effects Analysis (FMEA) is especially vital when choosing sensors for condition monitoring in industrial environments. Read on to learn why and how.
Electric motors are found everywhere in modern industry. They can be
A central feature of our solutions is predictive maintenance. By monitoring machinery and systems, you will know how much strain they can take before breaking down. This enables you to safely increase performance and strategically plan maintenance for minimal revenue loss.
We offer over 50 different sensor types. Explore the possibilities in our product brochure.
© 2024 El-Watch
